Board index Linux Apache

Moderator: chandranjoy

Tuning Apache and PHP

Postby chandranjoy » Thu Jul 01, 2010 8:23 pm

Tuning Apache
Apache is a highly configurable piece of software. It has a lot of features, but each one comes at a price. Tuning Apache is partially an exercise in proper allocation of resources, and involves stripping down the configuration to only what's needed.

Configuring the MPM


Apache is modular in that you can add and remove features easily. Multi-Processing Modules (MPMs) provide this modular functionality at the core of Apache -- managing the network connections and dispatching the requests. MPMs let you use threads or even move Apache to a different operating system.

Only one MPM can be active at one time, and it must be compiled in statically with --with-mpm=(worker|prefork|event)

The traditional model of one process per request is called prefork. A newer, threaded, model is called worker, which uses multiple processes, each with multiple threads to get better performance with lower overhead. The final, event MPM is an experimental module that keeps separate pools of threads for different tasks. To determine which MPM you're currently using, execute httpd -l.

Choosing the MPM to use depends on many factors. Setting aside the event MPM until it leaves experimental status, it's a choice between threads or no threads. On the surface, threading sounds better than forking, if all the underlying modules are thread safe, including all the libraries used by PHP. Prefork is the safer choice; you should do careful testing if you choose worker. The performance gains also depend on the libraries that come with your distribution and your hardware.

Regardless of which MPM you choose, you must configure it appropriately. In general, configuring an MPM involves telling Apache how to control how many workers are running, whether they're threads or processes. The important configuration options for the prefork MPM are shown in Listing 1.

Listing 1: Configuration of the prefork MPM
StartServers 50
MinSpareServers 15
MaxSpareServers 30
MaxClients 225
MaxRequestsPerChild 4000


In the prefork model, a new process is created per request. Spare processes are kept idle to handle incoming requests, which reduces the start-up latency. The previous configuration starts 50 processes as soon as the Web server comes up and tries to keep between 10 and 20 idle servers running. The hard limit on processes is dictated by MaxClients. Even though a process can handle many consecutive requests, Apache kills off processes after 4,000 connections, which mitigates the risk of memory leaks.

Configuring the threaded MPMs is similar, except that you must determine how many threads and processes are to be used. The Apache documentation explains all the parameters and calculations necessary.

Choosing the values to use involves some trial and error. The most important value is MaxClients. The goal is to allow enough worker processes or threads to run without causing your server to swap excessively. If more requests come in than can be handled, then at least those that made it through get service; the others are blocked.

If MaxClients is too high, then all clients experience poor service because the Web server tries to swap out one process to allow another one to run. Too low a setting means you may deny services unnecessarily. Checking the number of processes running at high loads and the resulting memory footprint of all the Apache processes gives you a good idea of how to set this value. If you go over 256 MaxClients, you must also set ServerLimit to the same number; read the MPM's documentation carefully for the associated caveats.

Tuning the number of servers to start and keep spare depends on the role of the server. If the server runs only Apache, you can use modest values as shown in Listing 1, because you're able to make full use of the machine. If the system is shared with a database or other server, then you should limit the number of spare servers being run.

Using options and overrides efficiently

Each request that Apache processes goes through a complicated set of rules that dictates any restrictions or special instructions the Web server must follow. Access to a folder can be restricted by IP address to a certain folder, or a username and password can be configured. These options also include the handling of certain files, such as if a directory listing is provided, how certain filetypes are to be handled, or whether the output should be compressed.

These configurations take the form of containers in httpd.conf such as <Directory> to specify that the configuration to follow refers to a location on disk, or <Location> to indicate that the reference is to a path in the URL. Listing 2 shows a Directory container in action.

Listing 2 : A Directory container being applied to the root directory
<Directory />
AllowOverride None
Options FollowSymLinks
</Directory>



In Listing 2, the configuration enclosed in the Directory and /Directory tags is applied to the given directory and everything under it — in this case, the root directory. Here, the AllowOverride tag dictates that users aren't allowed to override any options (more on this later). The FollowSymLinks option is enabled, which lets Apache look past symlinks to serve the request, even if the file is outside the directory containing Web files. This means that if a file in your Web directory is a symlink to /etc/passwd, the Web server happily serves the file if asked. With -FollowSymLinks used instead, this feature is disabled, and the same request causes an error to be returned to the client.

This last scenario is a cause for concern on two fronts. The first is a performance matter. If FollowSymLinks is disabled, then Apache must check each component of the filename (directories and the file itself) to make sure they're not symbolic links. This incurs extra overhead in the form of disk activity. A companion option called FollowSymLinksIfOwnerMatch follows the symbolic link if the owner of the file is the same as that of the link. This has the same performance hit as disabling following of symlinks. For best performance, use the options in Listing 2.

Security-conscious readers should be alert by now. Security is always a trade-off between functionality and risk. In this case, the functionality is speed, and the risk is allowing unauthorized access to files on the system. One of the mitigations is that LAMP application servers are generally dedicated to a particular function, and users can't create the potentially dangerous symbolic links. If it's vital to have symbolic link-checking enabled, you can restrict it to a particular area of the file system, as in Listing 3.

Listing 3. Restricting FollowSymLinks to a user's directory

<Directory />
Options FollowSymLinks
</Directory>

<Directory /home/*/public_html>
Options -FollowSymLinks
</Directory>


In Listing 3, any public_html directory in a user's home directory has the FollowSymLinks option removed for it and any child directories.

As you've seen, options can be configured on a per-directory basis through the main server configuration. Users can override this server configuration themselves (if permitted by the administrator by the AllowOverrides statement) by dropping a file called .htaccess into a directory. This file contains additional server directives that are loaded and followed on each request to the directory where the .htaccess file resides. Despite the earlier discussion about not having users on the system, many LAMP applications use this functionality to control access and for URL rewriting, so it's wise to understand how it works.

Even though the AllowOverrides statement prevents users from doing anything you don't want them to, Apache must still look for the .htaccess file to see if there is any work to be done. A parent directory can specify directives that are to be processed by requests from child directories, which means Apache must also search each component of the directory tree leading to the requested file. Understandably, this causes a great deal of disk activity on each request.

The easiest solution is to not allow any overrides, which eliminates the need for Apache to check for .htaccess. Any special configurations are then placed directly in httpd.conf. Listing 4 shows the additions to httpd.conf to enable password checking for a user's project directory, rather than putting in a .htaccess file and relying on AllowOverrides.

Listing 4. Moving .htaccess configuration into httpd.conf
<Directory /home/user/public_html/project/>
AuthUserFile /home/user/.htpasswd
AuthName "uber secret project"
AuthType basic
Require valid-user
</Directory>



If the configuration is moved into httpd.conf and AllowOverrides is disabled, disk usage can be reduced. A user's project may not attract many hits, but consider how powerful this technique is when applied to a busy site.

Sometimes it's not possible to eliminate use of .htaccess files. For example, in Listing 5, where an option is restricted to a certain part of the file system, overrides can also be scoped.

Listing 5. Scoping .htaccess checking
<Directory />
AllowOverrides None
</Directory>

<Directory /home/*/public_html>
AllowOverrides AuthConfig
</Directory>


After you implement Listing 5, Apache still looks for .htaccess files in the parent directories, but it stops in the public_html directory because the rest of the file system has the functionality disabled. For example, if a file that maps to /home/user/public_html/project/notes.html is requested, only the public_html and project directories are searched.

One final note about per-directory configurations is in order. Any document about tuning Apache will tell you to disable DNS lookups through the HostnameLookups off directive because trying to reverse-resolve every IP address connecting to your server is a waste of resources. However, any limitations based on hostname force the Web server to perform a reverse lookup on the client's IP address and a forward lookup on the result of that to verify the authenticity of the name. Therefore, it's wise to avoid using access controls based on the client's hostname and to scope them as described when they're necessary.

Persistent connections


When a client connects to a Web server, it's allowed to issue multiple requests over the same TCP connection, which reduces the latency associated with multiple connections. This is useful when a Web page refers to several images: The client can request the page and then all the images over one connection. The downside is that the worker process on the server has to wait for the session to be closed by the client before it can move on to the next request.

Apache lets you configure how persistent connections, called keepalives, are handled. KeepAlive 5 at the global level of httpd.conf allows the server to handle 5 requests on a connection before forcing the connection closed. Setting this number to 0 disables the use of persistent connections. KeepAliveTimeout, also at the global level, determines how long Apache will wait for another request before closing the session.

Handling persistent connections isn't a one-size-fits-all configuration. Some Web sites fare better with keepalives disabled (KeepAlive 0), and some experience a tremendous benefit by having them on. The only solution is to try both and see for yourself. It's advisable, though, to use a low timeout such as 2 seconds with KeepAliveTimeout 2 if you enable keepalives. This ensures that any client wishing to make another request has ample time, and that worker processes aren't idling while waiting for another request that may never come.

Compression


The Web server can compress the output before it's sent back to the client. This results in a smaller page being sent over the Internet at the expense of CPU cycles on the Web server. For those servers that can afford the CPU overhead, this is an excellent way of making pages download faster — it isn't unheard of for pages to be a third of their size after compression.

Images are generally already compressed, so compression should be limited to text output. Apache provides compression through mod_deflate. Although mod_deflate can be simple to turn on, it includes many complexities that the manual is eager to explain. This article doesn't cover the configuration of compression except to provide a link to the appropriate documentation (see the Resources section.)

Tuning PHP


PHP is the engine that runs the application code. You should install only the modules you plan to use and have your Web server configured to use PHP only for script files (usually those ending in .php) and not all static files.

Opcode caching

When a PHP script is requested, PHP reads the script and compiles it into what's called Zend opcode, a binary representation of the code to be executed. This opcode is then executed by the PHP engine and thrown away. An opcode cache saves this compiled opcode and reuses it the next time the page is called. This saves a considerable amount of time. Several opcode caches are available; I've had a great deal of success with eAccelerator.

Installing eAccelerator requires the PHP development libraries on your computer. Because different Linux distributions place files in difference places, it's best to get the installation instructions directly from the eAccelerator Web site (see the Resources section for a link). It's also possible that your distribution has already packaged an opcode cache, and you just have to install it.

Regardless of how you get eAccelerator on your system, there are a few configuration options to look at. The configuration file is usually /etc/php.d/eaccelerator.ini. eaccelerator.shm_size defines the size of the shared memory cache, which is where the compiled scripts are stored. The value is in megabytes. Determining the proper size depends on your application. eAccelerator provides a script to show the status of the cache, which includes the memory usage; 64 megabytes is a good start (eaccelerator.shm_size="64"). You may also have to tweak your kernel's maximum shared memory size if the value you choose isn't accepted. Add kernel.shmmax=67108864 to /etc/sysctl.conf, and run sysctl -p to make the setting take effect. The value for kernel.shmmax is in bytes.

If the shared memory allocation is exceeded, eAccelerator must purge old scripts from memory. By default, this is disabled; eaccelerator.shm_ttl = "60" specifies that when eAccelerator runs out of shared memory, any script that hasn't been accessed in 60 seconds should be purged.

Another popular alternative to eAccelerator is the Alternative PHP Cache (APC). The makers of Zend also have a commercial opcode cache that includes an optimizer to further increase efficiency.

php.ini


You configure PHP in php.ini. Four important settings control how much system resources PHP can consume, as listed in Table 1.

Table 1. Resource related settings in php.ini
Setting Description Recommended value
max_execution_time How many CPU-seconds a script can consume 30
max_input_time How long (seconds) a script can wait for input data 60
memory_limit How much memory (bytes) a script can consume before being killed 32M
output_buffering How much data (bytes) to buffer before sending out to the client 4096


These numbers depend mostly on your application. If you accept large files from users, then max_input_time may have to be increased, either in php.ini or by overriding it in code. Similarly, a CPU- or memory-heavy program may need larger settings. The purpose is to mitigate the effect of a runaway program, so disabling these settings globally isn't recommended. Another note on max_execution_time: This refers to the CPU time of the process, not the absolute time. Thus a program that does lots of I/O and few calculations may run for much longer than max_execution_time. It's also how max_input_time can be greater than max_execution_time

The amount of logging that PHP can do is configurable. In a production environment, disabling all but the most critical logs saves disk writes. If logs are needed to troubleshoot a problem, you can turn up logging as needed. error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR turns on enough logging to spot problems but eliminates a lot of chatter from scripts.

Tweaking/Optimizing/Tuning Apache:
http://modperlbook.org/html/11-1-Settin ... -11-SECT-1
http://youropensource.com/projects/662- ... MPM-module
http://gnufreakz.wordpress.com/2008/06/ ... ng-cpanel/

Enjoy folks...!
chandranjoy
Site Admin
 
Posts: 283
Joined: Fri Oct 23, 2009 11:19 pm

Return to Apache

Who is online

Users browsing this forum: No registered users and 1 guest


cron