Board index Windows

Moderator: chandranjoy

General Stuffs

Postby chandranjoy » Sun Nov 21, 2010 3:37 pm

How to Alter Startup Programs in Windows XP?

Some of your installed programs might come with extra features that most users generally overlook. While the resource usage attributed to these programs are usually small, they can build up and begin to consume your vital system resources, which can lead to a slower computer. Here is how to stop those programs from running and free up your system resources.

1.Remove icons in the Startup folder. Go to START -> Programs -> Startup, and remove any unused icons that are located in this folder. To delete, right click on the icon and choose "Delete".

2.Open MSConfig. Go to START -> Run, and enter msconfig. Hit enter to start the program. The following window should appear:

Image

3.Click on the 'Startup' tab. Here, you will see a list of programs that is similar to the one below:

Image

4.Uncheck any programs that you do not want Windows to run at startup.

5.Click 'OK'. A new window will appear, asking you to restart your computer.

6.Click 'Restart'.

Done. cheers..!

Issue and Fix:
Error message when you try to set an IP address on a network adapter.

When you trying to set the IP address on a network adapter, you may receive the following error message:
The IP address XXX.XXX.XXX.XXX you have entered for this network adapter is already assigned to another adapter Name of adapter. Name of adapter is hidden from the network and Dial-up Connections folder because it is not physically in the computer or is a legacy adapter that is not working. If the same address is assigned to both adapters and they become active, only one of them will use this address. This may result in incorrect system configuration. Do you want to enter a different IP address for this adapter in the list of IP addresses in the advanced dialog box?
Where XXX.XXX.XXX.XXX is the IP address that you are trying to set and Name of adapter is the name of the network adapter that is present in the registry but hidden in Device Manager.


If you click Yes, you see the TCP/IP properties where you can change the IP address to something different for the currently showing network adapter in Device Manager. If you click No, the IP address is assigned to the network adapter. Note that if you click No, the selected network adapter in Device Manager and the ghosted network adapter have the same IP address. In most cases, this does not cause any problems because the driver is disabled.

Note On a computer that is running Windows Server 2008, you receive the folloiwng error message:
Cannot rename this connection. A connection with the name you specified already exists. Specify a different name.

CAUSE

A network adapter with the same IP address is in the registry but is hidden in...
A network adapter with the same IP address is in the registry but is hidden in Device Manager. This can occur when you move a network card from one PCI slot to another PCI slot.

RESOLUTION

To resolve this problem, uninstall the ghosted network adapter from the registr...
To resolve this problem, uninstall the ghosted network adapter from the registry using one of the following methods:
Back to the top

Method 1

1. Click Start, click Run, type cmd.exe, and then press ENTER.
2. Type set devmgr_show_nonpresent_devices=1, and then press ENTER.
3. Type Start DEVMGMT.MSC, and then press ENTER.
4. Click View, and then click Show Hidden Devices.
5. Expand the Network Adapters tree.
6. Right-click the dimmed network adapter, and then click Uninstall.



Method 2

The DevCon utility is a command-line utility that acts as an alternative to Device Manager. When you use DevCon, you can enable, disable, restart, update, remove, and query individual devices or groups of devices. To use DevCon, follow these steps:

1. Download the DevCon tool by clicking the following article number to view the article in the Microsoft Knowledge Base:
311272 (http://support.microsoft.com/kb/311272/ ) The DevCon command-line utility functions as an alternative to Device Manager
2. Unpack the 32-bit or 64-bit DevCon tool binary to a local folder.
3. Click Start, click Run, then type cmd and press ENTER.
4. Type CD:\path_to_binaries to navigate to the devcon.exe is located.
5. Use the following syntax to find installed network adapters:
devcon findall =net or
devcon listclass net
Note In the output of the previous commands, there is a line for the ghosted network adapter that is similar to the following:
PCI\VEN_10B7&DEV_9200&SUBSYS_00D81028&REV_78\4&19FD8D60&0&58F0: 3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible)
6. Remove the ghosted device by typing the following syntax:
devcon -r remove "@PCI\VEN_10B7&DEV_9200&SUBSYS_00D81028&REV_78\4&19FD8D60&0&58F0"



MORE INFORMATION

When you receive the error message in the "Symptoms" section, the hidden or gho...
When you receive the error message in the "Symptoms" section, the hidden or ghosted network adapter does not appear in Device Manager unless you follow the steps in this article. Device Manager does show a network adapter and it typically has "#2" appended to the name.
Back to the top
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use (http://go.microsoft.com/fwlink/?LinkId=151500) for other considerations.
Back to the top

APPLIES TO

* Microsoft Windows 2000 Server
* Microsoft Windows 2000 Advanced Server
* Microsoft Windows 2000 Professional Edition
* Microsoft Windows Server 2003, Standard Edition (32-bit x86)
* Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
* Microsoft Windows XP Professional
* Windows Server 2008 for Itanium-Based Systems
* Windows Server 2008 Datacenter
* Windows Server 2008 Enterprise
* Windows Server 2008 Standard



Source:

http://support.microsoft.com/kb/269155
chandranjoy
Site Admin
 
Posts: 283
Joined: Fri Oct 23, 2009 11:19 pm

Return to Windows

Who is online

Users browsing this forum: No registered users and 1 guest


cron